4
Installation Instructions
KFCD
2. Using the 3/16” hex wrench (provided), loosen the clamp bolt
and turn the clamp 180 degrees (see Figure 4).
3. Using three screws, secure the base bracket to the bottom of
the desk clamp (see Figure 5).
4. Using the 3/16” hex wrench (provided), loosen the clamp wide
enough to fit through the hole in your table top or work surface
(see Figure 6).
5. Install the unit, fitting the clamp through the 2” to 3” diameter
hole, and secure by tightening the clamp bolt (see Figure 1).
Rotate 180 degrees
Figure 4. Rotate Base Clamp
Figure 5. Secure Base Clamp
Figure 6. Install in 2” or 3” Diameter Hole
Figure 7. Secure in 2” to 3” Diameter Hole
