CHIEF KFCD-110, Руководство по установке

Страница: 2 / 8

Installation Instructions KFCD
1
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
• WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment: if not, reinforce the struc-
ture before installing the KFCD.
• WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
• WARNING: The installer is responsible for verifying that the wall to which the KFCD is anchored will safely support
the combined load of all attached components or other equipment .
• WARNING: The weight of the display placed on the KFCD must not exceed 40 lbs. (18.1 kg), the maximum load capac-
ity of the KFCD .
• WARNING: Watch for pinch points. Do not put your fingers between movable parts.
• WARNING: Make sure the mount and brackets are correctly oriented.
• CAUTION: Check the unit for shipping damage before you begin the installation.
TOOLS REQUIRED FOR INSTALLATION
• Phillips Screwdriver
NOTE: Other tools may be required depending on the
mounting surface and method of installation.
CONTENTS
DRAWINGS ............................................................... 2
INSPECT THE UNIT BEFORE INSTALLING ............ 3
KFCD INSTALLATION ............................................... 3
Edge Clamp (Default) .......................................... 3
Grommet Clamp (2” or 3” Diameter Hole) ........... 3
Grommet Thru-Bolt (.375” - 3” Diameter Hole) ... 5
VESA Compliant Mounts ........................................... 6
Non-VESA Compliant Mounts .................................... 6
CABLE MANAGEMENT ............................................ 7
ADJUSTMENTS ........................................................ 7
Rotational Tilt, Pitch, and Roll Adjustment ........... 7
Lateral Tension Adjustment ................................. 7
Arm Tension Adjustment ..................................... 7