CHIEF K1S120, Руководство по установке

Страница: 15 / 20

Installation Instructions K1W/K1S Series
15
Adjustments - K1W22H/K1S22H models only
Display Adjustments
1. Loosen knobs securing faceplates to array. (See Figure 17)
2. Slide displays laterally on array to adjust lateral shift. (See
Figure 17)
3. Adjust pitch and pivot position as desired. (See Figure 17)
4. Tighten knobs to secure faceplates in position. (See Figure
17)
Figure 17
Array Bar Roll Adjustment
1. Loosen roll adjustment screws on back of array bracket.
(See Figure 18)
2. Adjust roll of array bar as desired. (See Figure 18)
3. Tighten roll adjustment screws on back of array bracket.
(See Figure 18)
Figure 18
Display Removal
WARNING:
Only remove display from mount when the
display can be lifted up from the mount! DO NOT remove
display unless the display is in the upright position! (See
Figure 19)
1. Make sure display is in the upright position.
2. Remove quick release faceplate from mount by pulling
quick release lever and sliding faceplate off mount. (See
Figure 19)
Figure 19
Display Removal Security Screw
NOTE:
In order to prevent display from being easily removed
from mount using the quick release lever, install
M4x4mm security screw (K) into lower hole on back of
faceplate. (See Figure 20)
Figure 20
2
3
2
1 4
3
3
3
1
3
2
2
quick release tab
2
(K)