CHIEF FCA623, Руководство по установке

Страница: 8 / 12

FCA623 Installation Instructions
8
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
each display and attached accessories does not exceed 300
lbs (137 kg) or 150 lbs (68.5 kg) per display after the FCA623
accessory has been installed to the XPAU or 250 lbs (113.4
kg) or 125 lbs (66.7 kg) per display if installed to the XVAU.
6. Hang interface brackets (A and B) to display rails. (See
Figure 8)
7. Use 1/4-20 x 1 1/4” socket head cap screws (HI) to secure
interface brackets (A and B) to rails for each display. Screws
must engage through both holes to be fully secured. (See
Figure 8)
NOTE:
Display positions may need to be adjusted after height
and/or plumb adjustments in order to maintain desired
alignment.
Figure 8
Dual Screen Cover Installation (Optional)
NOTE:
Installation of dual screen cover (D) is for aesthetic
purposes only and is completely optional.
NOTE:
Cover may be install above or below head assembly
depending on the position of the head assembly.
1. Remove displays from head assembly. (See XPAU or XVAU
installation instructions)
2. Install dual screen cover (D) into open area of column
assembly, above or below head assembly. (See Figure 9) or
(See Figure 10)
Figure 9
Figure 10
(HI) x 2
underside view
7
(below head assembly)
(D)
(above head assembly)
(D)