CHIEF FCA623, Руководство по установке

Страница: 6 / 12

FCA623 Installation Instructions
6
Figure 5
(rear view)
connecting brackets
6
back plate
tilt plate
front plate
(E x 3/removed screws x 3)
9
removed
8
nuts x 4
on top
6. Slide two of four connecting brackets from XPAU/XVAU
head assembly into corresponding groove on FCA623
interface. (See Figure 5)
7. Align four connecting brackets with outside four holes on tilt
plate. (See Figure 5)
8. Use four nuts removed in Step 4 to secure tilt plate to new
head assembly. (See Figure 5)
9. Install six #10-24 x 1 1/2” flat head cap screws (E and
removed screws) through front plate, new head assembly,
tilt plate and back plate to create complete head assembly.
(See Figure 5)
IMPORTANT ! : Make sure back plate and front plate are
reassembled correctly. The triangles must be at the top
when they are reattached! (See Figure 5)
10. Place new head assembly onto column assembly. (See
Figure 6)
11. Use four screws removed in Step 2 to reattach tilt plate to
column assembly. (See Figure 6)
Figure 6
10
x 4 11