18
LIFT
Position
UP
LOCK
RELEASE
DOWN
Figure 34
Figure 35
Figure 36
Figure 38
Figure 37
Adjust Working Heights
The PHOENIX has four (4) working heights from 19 inches
(480mm) to 40 inches (1010mm).
To Raise Machine Working Height
1. Turn off all auxiliary line valves or disconnect all tower
and auxiliary cylinders from system, Figure 34.
2. Rotate switch on pendant to “LIFT” position, Figure 35.
3. Activate pump by depressing and holding ”UP” button
on hand-held pendant. Raise machine until both
cylinders are above desired working height, Figure 36.
4. Depress and hold “DOWN” button on hand-held
pendant to lower machine into mechanical stops,
Figure 38.
To Lower Machine Working Height
1. Turn off all auxiliary line valves or disconnect all tower
and auxiliary cylinders from system, Figure 34.
2. Rotate switch on pendant to “LIFT” position,
Figure 35.
3. Activate pump by depressing and holding “UP” button
on hand-held pendant. Raise machine until both lock
arms are released, Figure 36.
4. Disengage lock arms by depressing and holding
“LOCK RELEASE” button on pendant. Figure 37.
5. Depress and hold the “DOWN” button on hand-held
pendant until machine is slightly above desired
working height, Figure 38.
6. Release “LOCK RELEASE” button on pendant to
release lock arms. Continue to depress
“DOWN” button on hand-held pendant until machine
settles into locks.
PHOENIX
USERS MANUAL
