16
LIFT
Position
UP
LOCK
RELEASE
DOWN
2. Turn off all auxiliary line valves or disconnect all tower
and auxiliary cylinders from system, Figure 25.
3. Rotate switch on pendant to “LIFT” position,
Figure 26.
4. Depress and hold the “UP” button on pendant to raise
machine until it is level and both safety lock
arms are released, Figure 27.
5. Activate lock arm release by depressing and holding
the “LOCK RELEASE” button on the pendant,
Figure 28.
6. Depress and hold the “DOWN” button on the hand-
held pendant. The machine will automatically tilt into
the loading position, Figure 29.
CAUTION:
1. Before lowering machine, clear all obstacles from
under and around machine.
2. DO NOT allow anyone or anything to ride on machine or
be under machine during lowering procedures.
3. Position cross-member immediately ahead of rear fixed
crossmember to avoid damage to the machine.
Figure 25
Figure 26
Figure 27
Figure 28
Figure 29
PHOENIX
USERS MANUAL
