background image

Page 2

For technical questions, please call 1-800-444-3353.

SKU 67431 

        

SaVe thiS manuaL

Keep this manual for the safety 

warnings and precautions, assembly, 

operating, inspection, maintenance and 

cleaning procedures.  Write the product’s 

serial number in the back of the manual 

near the assembly diagram (or month 

and year of purchase if product has no 

number).  Keep this manual and the 

receipt in a safe and dry place for future 

reference.

important SaFetY 

inFormation

in this manual, on the labeling, 

and all other information 

provided with this product:

  this is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

danger indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

warning 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

Caution, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.
 

notiCe is used to 

address practices 

not related to personal injury.
 

Caution, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

Lithium Battery Safety warnings

  

Lithium BatterieS Store a 

Large amount oF energY 

and wiLL Vent Fire or 

expLode iF miStreated:

Keep Battery pack dry.

1. 

do not do anY oF the 

2. 

FoLLowing to the BatterY 

paCK:

open,

a. 

drop,

b. 

Short-circuit,

c. 

incinerate, or

d. 

expose to temperatures greater 

e. 

than 140°F.

Charge Battery Pack only according 

3. 

to the instructions indicated in the 

charger manual.
Inspect Battery Pack before 

4. 

every use; do not use or charge if 

damaged.

Содержание 67431

















Отзывы: