Page 11
For technical questions, please call 1-800-444-3353.
SKU 67431
BLade mounting/remoVaL:
1.
Hold in the Spindle Lock while
a.
removing the Blade Bolt, turning it
counterclockwise.
Remove the Outer Flange.
b.
Hold open the Moveable Guard and
c.
remove the Blade. Leave the inner
flange in place. (If the Inner Flange
comes off, place it on the spindle
with its extended side first.)
Install the new blade, with the
d.
directional arrow on the blade
pointing the same as the directional
arrow on the stationary guard.
Place the Outer Flange on the
e.
spindle.
Hold in the Spindle Lock while
f.
reinstalling the Blade Bolt, turning it
clockwise. Tighten securely using
the wrench.
BeVeL adjuStment:
2.
Loosen the Bevel Knob and move
a.
the Base Plate to the desired bevel.
tighten the Bevel Knob before
b.
use.
depth adjuStment:
3.
1
depth
Lever
depth Scale
Base plate
depth
mark
a.
to read the approximate blade
depth (at 0° bevel):
Compare the Depth Mark (the
triangle) to the Depth Scale - the
illustration above shows about 1/2”
cut depth.
to adjust the depth:
b.
Loosen the Depth Lever and move
the Base Plate to the desired depth.
tighten the depth Knob before
use.
work piece and work area Set up
Work piece selection:
1.
Work piece must be free of foreign
a.
objects and loose knots.
Do not use to cut logs, tree limbs, or
b.
uneven lumber.
Wet lumber, green (unseasoned)
c.
lumber, and pressure treated lumber
all have an increased potential for
kickback and should only be cut with
a blade designed for cutting that
lumber. Wear a NIOSH-approved
respirator and have appropriate
