Chicago Pneumatic CP2828 Скачать руководство пользователя страница 4

Страница: 4 / 36

1.Technical Data

Model

Free speed

Torque

Dimension

LxHxW

Weight

Air Consumption

Air Inlet

Inner Hose

Dia.

Sound pressure

Sound power

Vibrations

Min

Max

Free speed

[min-1]

[Nm]

[inch]

[mm]

[kg]

[lb]

[SCFM]

[NL/s]

[inch]

[mm]

[dB(A)]

[m/s²] [m/s²]

max. pressure 6.3bar(90psi)
a

: Vibration level,

Uncertainty ;

Sound pressure dB(A),

= 3 dB Uncertainty.

Declaration of noise and vibration statement

(ISO 15744 and ISO 28927-2)

All values are current as of the date of this publication. For the latest information please visit www.cp.com.

These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools

tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual work places may be

higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation

design, as well upon the exposure time and the physical condition of the user. We, CHICAGO PNEUMATIC TOOLS , cannot be held liable for the consequences of using the

declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control. This tool may cause

hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/

PN3-02-NV_Declaration_info_sheet_0111.pdf. We recommend a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure,

so that management procedures can be modified to help prevent future impairment.

Additional Vibration Information

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

This additional vibration information may be of assistance to employers in meeting theirobligations (for example under EU Directive 2002/44/EC) to assess the risks to their

workers arising from hand arm vibration associated with the use of this tool.

Slip clutch screwdrivers are suitable for wood or self-tapping or self-drilling applications where torque requirements are not consistent.

• The declared vibration value can be used to estimate vibration during rundown. When slipping, the clutch may produce a considerably higher vibration emission which varies

with torque setting.

Model

Typical vibration emission when ratcheting at max. torque setting (vibration total values, m/s

)

CP2828

29.2

CP2829

38.2

• Only use this tool for work which other types of screwdrivers, which present lower vibration risks, are unable to perform satisfactorily.

• The vibration emission varies greatly with task and operator technique. Emissions outside the quoted range may occur for some applications.

• Operators should optimize their technique in order to minimize the clutch slipping time for each fastening operation.

• For the intended application of this tool, we estimate that normal operation should involve a clutch slipping time of less than 0,5s per fastener.

We point out that application of the tool to a sole specialist task may produce a different average emission and in such cases we strongly recommend a specific evaluation of the vibration

emission.

2. Machine type(s)

• This product is designed for installing and removing threaded fasteners in wood, metal and plastic.No other use permitted. For professional use only.

• Please read the instructions carefully before starting the machine.

3. Operation (See figures)

• Fix the accessories properly to the tool.

• Connect device as shown in Fig. 01.

• The use of a side handle (2050521753) is recommended for a torque higher than 4 Nm.

• To start the machine, pull the trigger (A). Machine speed is increase by increasing pressure on the trigger. Release the trigger to stop.

• To switch rotation, push the switch (B) as shown in Fig. 03

4. Lubrication

Motor

Clutch

Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line lubricator cannot

be used, add air motor oil to the inlet once a day.

Use Molykote BR2PLUS or equivalent grease. [14 oz (395g)]

5. Maintenance instruction

• Follow local country environmental regulations for safe handling and disposal of all components.

• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised dealer for advice

on technical service or if you require spare parts.

• Always ensure that the machine is disconnected from energy source to avoid accidental operation.

• Disassemble and inspect the tool every three 3 months if the tool is used every day. Replace damaged or worn parts.

• To keep downtime to a minimum, the following service kits are recommended :

Tune-Up Kit

: see part list

6. Disposal

• The disposal of this equipment must follow the legislation of the respective country.

• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.

• Repair only by technical maintenance staff.

7. EC Declaration of conformity

We :