Page 3
SKU 98838
For technical questions, please call 1-800-444-3353.
Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Provide barriers or shields as needed.
PERSONAL SAFETy
Stay alert. Watch what you are doing, and use common sense when operat-
1.
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Engine ignition (2) is in its “OFF” po-
3.
sition before moving the Generator
and
before performing any service, main-
tenance, or cleaning procedures on the unit.
Remove adjusting keys or wrenches before turning the Generator on.
4.
A
wrench or a key that is left attached to a rotating part of the machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times.
5.
Proper foot-
ing and balance enables better control of the power tool in unexpected situations.
6.
use safety equipment. Always wear eye protection.
Always wear
ANSI approved safety impact goggles when using this product. ANSI
approved hearing protection must also be used.
TOOL uSE AND cARE
Do not force the tool. use the correct tool for your application.
1.
The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the Generator if the Engine’s ignition (2) does not turn it on or off.
2.
Any tool that cannot be controlled with its power switch is dangerous and must be
replaced.
Store idle tools out of reach of children and other untrained persons.
3.
Tools
are dangerous in the hands of untrained users.
Maintain tools with care.
4.
Properly maintained tools are less likely to malfunction
and are easier to control. Do not use a damaged tool. Tag damaged tools
“Do
not use”
until repaired.
check for misalignment or binding of moving parts, breakage of parts, and
5.
any other condition that may affect the tool’s operation. if damaged, have
