Page 5
For technical questions, please call 1-888-866-5797.
Item 91061
S
AFETY
O
PERA
TION
M
AINTENANCE
S
ETUP
Risk of Burns – Product Gets Very Hot During Use
1.
Do not touch the burner while the torch is lit.
Before servicing, wait 30 minutes for it to cool down.
2.
Keep children away from the work area.
Operation Precautions
1. Inspect before each use; do not use if parts loose,
leaking, or damaged.
Connect, then check for leaks using soapy water.
Do not use flame to check for leaks.
Only qualified technician may repair product.
2. Close torch gas control knob before connection.
3. Close torch gas control knob after use and before
leaving area. Do not leave unattended while lit.
4. Set up and use according to
manual instructions only.
5. Wear ANSI-approved safety goggles with side
shields and flame retardant gloves during use.
6. This torch must be used only with HD-5 propane
gas. The propane tank should hold no more than
1 pound of LP gas. Do not use bulk tanks of larger
capacity. Do not use any other fuel. The torch must
be used only with a vapor withdrawal LP propane
tank equipped with a POL valve. The tank must
be constructed and marked in such a way as to
comply with the specifications for LP gas tanks by
the U.S. Department of Transportation (DOT).
7. The use of this product must be in conformity
with local codes or, in the absence of local codes,
with the standard for storage and Handling of
Liquefied Petroleum Gases, ANSI/NFPA 58.
For Canada, the use must be in accordance with
the current CAN/CGA B149.2 installation codes.
8. Keep children away. Children must never
be allowed in the work area. Do not let them
handle, move, or adjust this product.
9. Store idle equipment. When not in use, this product
must be stored in a dry location to inhibit rust.
Lock up torches and keep out of reach of children.
10. Use as intended only. Do not alter product
in any way, or use with any accessory not
specifically designed for this product.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
