A9X
18650
468 M Beam Distance
29820 Peak Beam Intensity
1.5 M Impact Resistant
1.5 M Submersible IPX8
1053
360
CR123A
LUMENS
LUMENS
1053
LUMENS
360
LUMENS
1 hr 52 min
8 hr
Candle Instructions
Remove the reflector housing assembly from the LED
Module, turn on to the desired setting, and then stand on
the tail cap. Store the reflector housing assembly in a
manner to keep dust, debris, elements, and water away
from the reflector.
Caution
Damage will occur if the inside surface of the reflector is
touched. Use cleaning products for eyeglasses to prevent
damage to the lens and waterproof seals. Clean and
lubricate the threads with a soft cloth and silicone grease
twice a year. The use of petroleum based lubricates will
damage the seals. Install the battery anode, positive (+)
towards the LED to prevent failure. Avoid shining the light
of Tiablo A9X into eyes as can cause injury.
Warranty
Tiablo warrants our A9X model flashlight to be free from
defect in workmanship and materials for two years from the
date of purchase. Tiablo A9X must be purchased through
an Authorized Dealer. Tiablo’s liability will be limited to the
cost of the flashlight. Proof or purchase, serial number,
and an RMA number issued by Tiablo are required before
returning the Tiablo A9X flashlight or the defective part.
Improper use, misuse, abuse, or alteration will void the
warranty. For assistance, or complete warranty details,
terms, conditions, or how to claim, contact your dealer,
distributor, or contact us at: [email protected]
www.tiablolight.com
