temperature conditions. If Battery fluid comes in contact with skin, wash with
soap and water and rinse with lemon juice and vinegar. If the fluid comes in
contact with eyes, flush with water for several minutes and contact a doctor
immediately. Never burn the Battery, as it can explode in a fire. Do not attempt
to charge a leaking Battery. Contact local solid waste authorities for instructions
on correct disposal or recycling of the Battery.
8.
Do not allow children to handle or play with this product.
9.
Store idle equipment. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment, and keep out
of reach of children.
10.
Do not use this product if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not attempt to use this
product.
11.
Industrial applications must follow OSHA requirements.
12.
Maintain this product with care. Keep this product clean and dry for better and
safer performance.
13.
Maintenance: For your safety, service and maintenance should be performed
regularly by a qualified technician.
14.
Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the safe operation of this product. Re-
place or repair damaged or worn parts immediately.
15.
Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product.
16.
Use the right tool or attachment for the right job. Do not attempt to force a
small tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not
intended.
17.
Always switch to a fresh Battery when tool performance begins to dimin-
ish. Severe heat is most destructive to a Battery. The more heat generated, the
faster the Battery loses power. A Battery that gets too hot can be permanently
damaged. Never over-discharge a Battery by using the tool even after tool
SKU 91007
PAGE 9
