FIGURE D
SKU 91007
PAGE 8
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
no xxxx/min.
A
V ~
SPECIFIC SAFETY RULES
1.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Hammer Drill/
Driver in areas near flammable chemicals, dusts, and vapors.
2.
Maintain labels and nameplates on the Hammer Drill/Driver. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
3.
When using a hand-held power tool, always maintain a firm grip on the tool
with both hands.
4.
To avoid electrical shock, do not pull or carry the Battery Charger (33) by
its Power Cord or pull the Power Cord around sharp corners or edges. Do
not unplug the Battery Charger by pulling on the Power Cord. Keep the Power
Cord away from heated surfaces.
5.
Never leave the Battery Charger unattended when it is plugged into an
electrical outlet. Make sure to unplug the Battery Charger from its outlet before
leaving the work area.
6.
Use eye protection. Always wear ANSI approved safety impact eye goggles
when working with this product.
7.
Proper Battery Care: Battery (28) leakage may occur under extreme usage or
