3.
Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration. (See Figure A.)
FIGURE A
SKU 91007
PAGE 6
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
4.
The Charger for this Hammer Drill/Driver has a 2-Prong Plug, is marked
“Double Insulated”, and does not require grounding. The Charger has a
special double insulation system which satisfies OSHA requirements and com-
plies with the applicable standards of Underwriters Laboratories, Inc., the
CanadianStandard Association, and the National Electrical Code.
5.
Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
FIGURE B
