Page 8
For technical questions, please call 1-888-866-5797.
Item 68861
SAFET
y
Op
ERA
TION
M
AINTENANCE
SETU
p
Maintenance and Servicing
procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM ACCIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
TO pREVENT SERIOUS INJURy FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general condition
of the Tool. Check for loose screws, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2. INSPECT ACCESSORIES:
The Sanding Sheets should not be dull
or contain excessive debris build-up.
The Angle Scraper and Cutting Blade
should be clean and sharp.
3. AFTER USE, clean external surfaces
of the tool with clean cloth.
4. If you notice decreased performance, have
the unit serviced and Carbon Brushes
replaced by a qualified technician.
5.
WARNING! If the power Cord of this
Tool is damaged, it must be replaced
only by a qualified service technician
.
