Page 6
For technical questions, please call 1-888-866-5797.
Item 68861
SAFET
y
Op
ERA
TION
M
AINTENANCE
SETU
p
Setup - before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following
pages, refer to
Parts List and Assembly Diagram
on page 10.
Functions
Angled Cutter
(sold separately)
Power Switch
Spindle
Hex Wrench
Operating Instructions
Read the ENTIRE IMpORTANT
SAFETy INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
Tool Set Up
TO pREVENT SERIOUS INJURy FROM ACCIDENTAL OpERATION:
Turn the power Switch of the tool off and unplug the tool from its electrical
outlet before adjusting tool or installing accessories.
1. Turn the Power Switch off and unplug the tool.
2. Place the attachment over the Spindle, shoulder
facing away from the tool. Line up the holes on the
attachment with the pins on the Spindle shoulder.
