background image

SKU 66127 

For technical questions, please call 1-800-444-3353. 

Page 5

7. 

The battery charger gets 

hot during use.  The 

charger’s heat can build 

up to unsafe levels and 

create a fire hazard if it does not 

receive adequate ventilation, due to 

an electrical fault, or if it is used in a 

hot environment. 

Do not place the charger on a flam

-

mable surface.  Do not obstruct any 

vents on the charger.  

especially 

avoid placing the charger on car-

pets and rugs; they are not only 

flammable, but they also obstruct 

vents under the charger. 

Place the charger on a stable, solid, 

nonflammable surface (such as a 

stable metal workbench or concrete 

floor) at least 1 foot away from all 

flammable objects, such as drapes or 

walls.  Keep a fire extinguisher and a 

smoke detector in the area.  Fre-

quently monitor the charger and 

battery during use.
This product is not a toy.  Keep it out 

8. 

of reach of children.
People with pacemakers should 

9. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone.

 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any power cord must be properly 

grounded.  Ground Fault Circuit Inter-

rupter (GFCI) should also be imple-

mented – it prevents sustained elec-

trical shock.

Some dust created by power sand-

10. 

ing, sawing, grinding, drilling, and 

other construction activities, contains 

chemicals known [to the State of Cali-

fornia] to cause cancer, birth defects 

or other reproductive harm.  Some 

examples of these chemicals are: 

• Lead from lead-based paints

 

• Crystalline silica from bricks and ce

-

ment or other masonry products 

• Arsenic and chromium from chemi

-

cally treated lumber 

Your risk from these exposures var-

ies, depending on how often you do 

this type of work.  To reduce your 

exposure to these chemicals: work in 

a well ventilated area, and work with 

approved safety equipment, such as 

those dust masks that are specially 

designed to filter out microscopic 

particles.  (California Health & Safety 

Code § 25249.5, 

et seq.

)

WARNING: Handling the cord on 

11. 

this product will expose you to lead, 

a chemical known to the State of 

California to cause cancer, and birth 

defects or other reproductive harm. 

Wash hands after handling.  (Califor-

nia Health & Safety Code §  25249.5, 

et seq.)
The warnings, precautions, and in-

12. 

structions discussed in this instruction 

manual cannot cover all possible con-

ditions and situations that may occur.  

It must be understood by the operator 

that common sense and caution are 

factors which cannot be built into this 

product, but must be supplied by the 

operator.

Vibration safety

This tool vibrates during use.  Re-

peated or long-term exposure to 

Содержание 66127













Отзывы: