background image

Page 4

For equipment technical questions, please call 1-888-866-5797. 

For engine technical questions, please call 1-800-520-0882.

ITEM 61924 

        

SAFETY

SETUP

O

PERA

TION

M

AINTENANCE

Set up Precautions

1.  Gasoline fuel and fumes are flammable, and 

potentially explosive.  Use proper fuel storage 

and handling procedures.  Do not store fuel 

or other flammable materials nearby.

2.  Have multiple ABC class fire extinguishers nearby.
3.  Operation of this equipment may create sparks that 

can start fires around dry vegetation.  

A spark arrestor may be required. The operator 

should contact local fire agencies for laws or 

regulations relating to fire prevention requirements.

4.  Set up and use only on a flat, level, 

well-ventilated surface.

5.  Wear ANSI-approved safety goggles, heavy-duty 

work gloves, and dust mask/respirator during set up.

6.  Use only lubricants and fuel recommended 

in the Specifications chart of this manual.

Operating Precautions

1. 

CARBON MONOXIDE HAZARD 

Using an engine indoors  

CAN KILL YOU IN MINUTES. 

Engine exhaust contains 

carbon monoxide.  This is a poison 

you cannot see or smell. 

NEVER use inside a home or garage,  

EVEN IF doors and windows are open. 

Only use OUTSIDE and far away from windows, 

doors, and vents.

2.  Keep children away from the equipment, 

especially while it is operating. 

3.  Keep all spectators at least six feet 

from the Engine during operation.

4.  Fire Hazard! Do not fill fuel tank while engine is 

running. Do not operate if gasoline has been spilled. 

Clean spilled gasoline before starting engine. 

Do not operate near pilot light or open flame.

5.  Do not touch engine during use. 

Let engine cool down after use. 

6.  Never store fuel or other flammable 

materials near the engine.

7.  Only use a suitable means of transport and 

lifting devices with sufficient weight bearing 

capacity when transporting the equipment.

8.  Secure the equipment on transport vehicles to 

prevent it from rolling, slipping, and tilting.

9.  Industrial applications must follow 

OSHA requirements.

10. Do not leave the equipment unattended when it is 

running.  Turn off the equipment (and remove safety 

keys, if available) before leaving the work area.

11.  The equipment can produce high noise levels.  

Prolonged exposure to noise levels 

above 85 dBA is hazardous to hearing. 

Wear ear protection when operating the  equipment 

or when working nearby while it is operating.

12. Wear ANSI-approved safety glasses 

and hearing protection during use.

13. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to a heart pacemaker could cause 

pacemaker interference or pacemaker failure.  

Caution is necessary when near the 

engine’s magneto or recoil starter.

14. Use only accessories that are recommended 

by Harbor Freight Tools for your model.  

Accessories that may be suitable for one 

piece of equipment may become hazardous 

when used on another piece of equipment.

15. Do not operate in explosive atmospheres, 

such as in the presence of flammable 

liquids, gases, or dust.  Gasoline-powered 

engines may ignite the dust or fumes.

16. Stay alert, watch what you are doing and use 

common sense when operating this piece of 

equipment.  Do not use while tired or under the 

influence of drugs, alcohol or medication.

17. Do not overreach.  Keep proper footing and 

balance at all times.  This enables better control 

of the equipment in unexpected situations.

18. Use this equipment with both hands only.   

Using equipment with only one hand 

can easily result in loss of control.

19. Dress properly.  Do not wear loose clothing or 

jewelry.  Keep hair, clothing and gloves away 

from moving parts.  Loose clothes, jewelry or 

long hair can be caught in moving parts.

20. Parts, especially exhaust system components, 

get very hot during use.  Stay clear of hot parts.

21. Do not cover the equipment during operation.

Содержание 61924

























Отзывы: