Page 10
For technical questions, please call 1-888-866-5797.
Item 61441
SAFET
y
O
PERA
TION
M
AINTENAN
c
E
SETUP
Operating instructions
Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURy FROM AccIDENTAL OPERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
Chisels come with or without collars. Figure D
shows installation of a chisel without a collar
(the included chisel is without a collar).
Note:
If the Chisel doesn’t slide in easily, apply
grease to the loading end of the Chisel.
Mounting chisels without a collar
1. Pull the Lock Lever to the side, just
far enough to allow the Chisel to be
inserted, as shown in Figure D.
Flat
Notch
1
2
Lock
Lever
Figure D
Note:
Flat Notch on Collar-less Chisel
must face the Lock Lever.
2. Position the Lock Lever as shown in Figure D
and Figure E. Insert Chisel with the Flat
Notch facing the Lock Lever, as shown.
Lock Lever
Figure E
3. Slide the Chisel in as far as it will go.
4. Pull the Lock Lever back until it touches the Spring,
locking the Chisel into place. See Figure F.
Figure F
Содержание 61441
Страница 1: ......
