SKU 46935
For technical questions, please call, 1-800-444-3353.
Page 3
Wear an ANSI approved dust mask or respirator when working around metal, wood,
and chemical dusts and mists. Always wear ear protection. Hearing protection is
required for any other persons in the work area.
do not overreach
. Keep proper footing and balance at all times. Do not reach over
or across running machines.
Maintain tools with care
. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.
disconnect power
. Unplug tool when not in use.
Remove adjusting keys and wrenches
. Check that keys and adjusting wrenches
are removed from the tool or machine work surface before plugging it in.
Avoid unintentional starting
. Be sure the Switch Knob #87 is not depressed when
not in use and before plugging in. Do not carry any tool with the switch depressed,
whether it is plugged in or not.
Stay alert
. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Take caution as some woods contain preservatives such as copper chromium
arsenate (CCA) which can be toxic
. When cutting these materials extra care
should be taken to avoid inhalation and minimize skin contact.
Check for damaged parts
. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment and binding of moving parts; any broken
parts or mounting fixtures; and any other condition that may affect proper operation.
Any part that is damaged should be properly repaired or replaced by a qualified
technician. Do not use the tool if any switch does not turn On and Off properly.
guard against electric shock
. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories
. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available from
Harbor Freight Tools.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California]
to cause cancer, birth defects or other reproductive harm.
Some examples of
these chemicals are:
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
