SKU 46935
For technical questions, please call, 1-800-444-3353.
Page 2
Specifications
Power Source
115 V~, 1800 W, 17 A Running, 3 Prong Grounded Plug
Hammer Blow Rate 1030 BPM
Tool Mount
1-1/8” Hex Receiver
Net Weight
77 lb.
* Includes One Pointed Chisel and Flat Chisel
note:
Performance of this tool (if powered by line voltage) may vary depending
on variations in local line voltage. Extension cord usage may also affect tool
performance.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARnIng: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean
. Cluttered areas invite injuries.
Observe work area conditions
. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids.
Keep children away
. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment
. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
do not force tool
. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the
tool capacity.
use the right tool for the job
. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which this
tool was designed. Do not modify this tool and do not use this tool for a purpose for
which it was not intended.
dress properly
. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Wear steel tipped shoes when working with the Breaker Hammer.
use eye, face and ear protection
. Always wear ANSI approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood chips.
1.
2.
3.
4.
5.
6.
7.
8.
REV 02i, 06l
