background image

SKU 30858   

 For technical questions please call 1-800-444-3353. 

           Page 7

SPECIFIC SAFETY RULES

1. 

 WARNING!    Do not mount the Halogen Light on or in any 

residential structure.  Mounting 

in such a location creates a fire hazard that can result in property damage, severe personal 
injury, and/or death.

2. 

ALWAYS point the Light away from the wall, whether the unit is in use or not.  

If the 

light is accidentally pointed at the wall while it is on or while it is still hot when turned off, a 
fire may result.

3. 

Keep all flammable materials and wall hangings at least 10 feet from the mounting   

 

location.

4. 

Make sure to turn off the Halogen Light and unplug the unit from its electrical outlet  

 

when unattended.

5. 

Immediately upon turning on the Halogen Light, the Halogen Bulb become VERY    

 

hot.  

While operating the unit, do not touch the Halogen Bulb, or grid.

6. 

Avoid excessive UV radiation.  

Should your skin begin to feel hot while operating the    

 

Halogen Light, immediately remove yourself from the unit’s light rays.

7. 

Avoid serious eye injury.  

Do not look directly into the Halogen Bulb when operating this  

 

product.  Always wear ANSI approved safety goggles when working with tools and  

 

 

equipment.

8. 

Do not touch the Halogen Bulb at any time. 

 Oil from skin will drastically shorten the 

bulb’s life-span if not cleaned (with rubbing alcohol) before use.  Handle with a soft, clean 
cloth instead.

9. 

Do not operate the Light with a missing or damaged Lens or Grid.

10. 

Do not operate the Halogen Light with the Grid open.

11. 

Turn off the Halogen Light, unplug its Power Cord from its 120 volt, grounded, 

 

electrical outlet, and allow it to completely cool down prior to performing any 

 

inspection,   maintenance, or cleaning on the unit.

12. 

After its use, make sure to allow the Light to completely cool down before storing the 
unit.

13.

 

Do not obstruct walkways or common areas with the cord.

14.

 

The  Light is weatherproof but not waterproof.  Do not submerge the Light in water.

Содержание 30858











Отзывы: