8
HAND-HELD MICROPHONE(SQ-216/SQ-316/ SQ-816/SQ-916)
1
The microphone is shown in Fig 1.
Fig.1
SQ-216
SQ-816
SQ-316/
SQ-916
13
INSTALLATION OF CABLE RESTRAINT
To prevent contact noise caused by constant tension applied to the connector,,
a cable restraint is designed such that tension is totally reduced when it is
properly used ( see Fig.6 ).
When the audio cable go through the cable restraint, it could prevent sweat from
going diectly into the electronic board via the connector. This is another
advantage of the cable restraint.
Fig.6
UH-1000/VH-1000/UB-1000/VB-1000 these microphone have a sensitivity setting per the SET, UP, DOWN buttons as
described earlier.SQ-916/SQ-316 have a sensitivity switch for close mouth singing and normal speech, please select
level N.( Normal ). For tripod-mount application, please select the level H (high) .
Sensitivity Level Setting
Depending on customer requirements, Lavalier / Headset microphone or instrument inputs could be
connected to the beltpack transmitter via the audio input connector. User is free to choose the various
input sources but is advised to take note that connector used must be compatible to each other. The pin
configurations for mini XLR connector is as follow.
Installation of Lavalier / Headset
Microphones or Instrument Inputs.
Mini-XLR
1
2
3
4
MUTE
OFF
ON
ANTENNA
GT IN
MT IN
GND
PHANTOM POWER
BATTERY WEAK /
AUDIO MUTE INDICATOR
AUDIO MUTE SWITCH
UB-1000
ANTENNA
GT IN
LED INDICATOR
MT IN
GND
PHANTOM POWER
POWER
SWITCH
POWER
OFF
ON
1
2
3 4
Normal Sensitivity
High Sensitivity
SM-916
