Turn Power ON of receiver, the following page will appear.
After 5 seconds one of the following pages will automatically appear, depending
which one was last selected as main page.
Press
will
roll to next page
Press
will
roll to next page
Press
will
roll to next page
Press
will
roll to next page
Press
will
roll to next page
Remark : Transmitter is at OFF status.
3
UDR-4000U(U1~U4)with UDR-1000M receiver module installed
801.100
I I
If
or
is not pressed
again,this page will stay
as main page.
If
is not pressed
again,this page will stay
as main page.
or
If
is not pressed
again,it will automatically
return to one of the
3 main pages.
or
If
is not pressed
again,it will automatically
return to one of the
3 main pages.
or
If
is not pressed
again,it will automatically
return to one of the
3 main pages.
or
USER
I I
CF : 01-01
I I
M
H
CHIAYO
UDR-1000M
SQ [1]
-100dBm
U-MODE
P-MODE
CHIAYO
I I
USER
I I
CF : 01-01
I I
To view and roll the various display pages
18
RECEIVER INSTALLATION
Audio output connection
There are two audio outputs on the back of the Diversity receiver. Mic-level
balanced and Line-level unbalanced. Use shielded audio cable for the connection
between the receiver and the mixer. If the mixer / amp is a 1/4" phone jack, connect
a cable from the 1/4" unbalanced audio output from the receiver to the mixer / amp.
If the mixer has an XLR input, connect a cable from the balanced XLR audio output
from the receiver to the mixer input. Audio output connection as shown below.
For best operation, the receiver should be placed at
least 1m above the ground and 1m away from a wall
or metal surfaces to minimize reflections. The
transmitter should also be at least 1m away from a
wall or metal surface to minimize reflections. The
transmitter should also be at least 1m away from the
receiver as shown.
Keep antennas away from noise source such as
motors, automobiles, neon light, synthesizer,
computer as well as large metal objects.
ANT.A
C 1
H
C 2
H
C 3
H
C 4
H
BALANCED
AF OUT
ANT.B
3
1 2
1.GND
2.
3.
+
-
MIC
LINE
AC IN 100V-240V
ANT.B
ANT.B
