8
Instructions
Parts and functions
of beltpack transmitter
SM-9000 IrDA
1.
Antenna
2.
LCD
3.
Cover release button
4.
Power switch
5.
IrDA synchronizing button
6.
Menu button
7.
Setting button
8.
High-impedance gain control (GT)
9.
Low-impedance gain control (MT)
10.
Battery compartment
11.
Audio mute switch
12.
Battery power LED
13.
IrDA sensor area
14.
Mini XLR connector
15.
Charging contacts
Channel synchronizing of the receiver and transmitter
Align infrared areas of the receiver and transmitter within 10~30cm.
A. Changing the receiver’s channel
B. Changing the transmitter’s channel
►
►
►
►
1.
Press the synchronizing button of the
transmitter.
2. IRDA PLL CALL
will appear on the
transmitter
’s LCD denote synchronizing the
receiver
’s channel.
3.
If the receiver
’s channel is synchronized,
PLL SEND OK
will appear. Otherwise,
please try again if the LCD shows
IRDA
FAIL.
1.
Press the synchronizing button of the receiver
and the receiver will transmit the frequency to
the transmitter and synchronize the channels.
2.
The transmitter's channel will be
synchronized by the receiver.
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each
other, devices are within 30cm of each other, and try again.
IRDA
PLL CALL
PLL SEND
OK
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
C H : 0 0 1
650.000M
C H : 0 1 0
652.250M
1
2
3
3
9
7
8
4
5
6
10
11 12
13
14
15
10~30cm
