4
Instructions
Adjusting VOLUME level
1.
The setting can be made right on the homepage.
2.
Press
▲(
UP)
or ▼(
DOWN)
button to choose a new level.
3.
After the setting is made, wait 5 seconds to store the setting.
Adjusting SQUELCH level
When interference is encountered try reducing the sensitivity of the receiver, thus less
susceptible to interference.
1.
Press-release
SET
button until the SQUELCH SETUP page appears.
2.
Then press
▲(
UP)
or ▼(
DOWN)
button to choose a new level between 1 and 10.
3.
After a level is chosen, wait 5 seconds to store the setting.
Since increasing the squelch level will also reduce the reception distance, it
’s recommended to
choose the lowest level that can eliminate the interference.
If this still does not solve the problem it means this frequency is not suitable. Adjust the squelch
back to its preset level and use the scan function to locate a clear, interference-free channel.
Receiver installation
1.
For best operation, the receiver should be at least 1m above the ground and 1m away from a
wall or metal surface to minimize reflections.
2.
The transmitter should also be at least 1m away from a wall or metal surface to minimize
reflections. The transmitter should also be at least 1m away from the receiver.
3.
Keep antennas away from noise source such as motors, automobiles, neon light as well as
large metal objects.
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
POWER
A
B
SDR-6200 IrDA
UHF 2-WAY SYNC. TRUE DIVERSITY RECEIVER
D IV E R S IT Y A U D IO
:
