5
IrDA-9000
Single-Channel 2-Way Sync True Diversity Wireless Microphone
Audio output connection
There are two audio outputs on the back of the receiver, MIC-level balanced and LINE-level
unbalanced. Use shielded audio cable for the connection between the receiver and the
amplifier/mixer. If the amplifier/mixer has a 1/4"(6.3mm) phone jack, connect a cable from the
1/4"(6.3mm) unbalanced audio output from the receiver to the amplifier/mixer. If the
amplifier/mixer has an XLR input, connect a cable from the balanced XLR audio output from the
receiver to the amplifier/mixer input.
Unbalanced 6.3mm phone jack connection
Balanced XLR connection
Rack mounting
The receiver can be cabinet-mounted by either one or two units. If only one receiver is to be
mounted, an optional kit is available and it's installed as shown in Fig 1. If two receivers are to
be mounted, they can be assembled by another kit and installed as shown in Fig 2.
Fig 1. Rack mount one receiver
Fig 2. Rack mount two receivers
