8
Care and Cleaning
w
WARNING
Electrical Shock Hazard. Disconnect power before
cleaning. Do not immerse cord, plug, or base in any liquid.
1. Unplug. Allow Steamer to cool completely.
2. Open door of Water Reservoir and hold over a sink to
drain all water from Water Reservoir. Close door and
store in Travel Bag.
To Remove Minerals and Sediment from Steamer
(recommend every month)
1. Add 3 tablespoons (30 ml) white vinegar to Water
Reservoir and follow steps 1–5 in “How to Steam”
section. Add 2 tablespoons (30 ml) cold water to Water
Reservoir. Repeat steps to remove any remaining
vinegar in Steamer.
NOTE: Do not steam clothes with vinegar in Water
Reservoir.
Steamer is not steaming.
• No water in Water Reservoir. Add cold water and follow
“How to Steam” instructions.
• Steamer is not plugged into an outlet. Plug into outlet.
Water is leaking.
• Unplug. Check that Water Reservoir Door is secured in place.
Dry off Steamer. If leak continues, do not operate Steamer.
Contact CHI Garment Care.
Steamer is trailing or spitting.
• Clean Steamer by following the “To Remove Minerals and
Sediment from Steamer” section.
• ALWAYS empty Water Reservoir after each use. Water left in
Reservoir may discolor clothing or cause mineral/sediment
buildup in Steamer.
Troubleshooting
