6
NOTES:
• To avoid garment damage, check garment label before
using Steamer. The label inside the clothing should
recommend fabric care instructions.
• Steaming garments will give a relaxed, not pressed, look.
• Do not use Steamer if garment label has this symbol (
).
1. Move Water Reservoir Door down and fill Water
Reservoir with cold water. Do not overfill. If you have
extremely hard water, mix 50% untreated tap water
with 50% distilled or demineralized water for use in the
Steamer.
2. Close Water Reservoir Door.
3. Plug into outlet.
4. Power Indicator Light flashes while heating up. Steamer
is ready to use in about 30 seconds or once Power
Indicator Light stays solid red.
5. Press and hold Steam Button for steady steaming.
6. Hold Steamer by Steamer Handle close to fabric.
7. Carefully move Steamer up and down over wrinkled
areas. Do not hold Steamer in one spot for any length
of time; this may cause damage to fabric.
8. Unplug Steamer before refilling. Repeat Steps 1 and 2
to refill Water Reservoir. Plug Steamer into outlet and
wait until Power Indicator Light is solid red to continue
steaming.
9. When steaming is complete, unplug and cool
completely.
How to Steam
w
CAUTION
Burn Hazard. Steam is hot. Avoid contact with
escaping steam.
