Chevrolet MONTE CARLO 2005 Скачать руководство пользователя страница 303

Страница: 303 / 396

Back-Up Lamps

The back-up lamps are located in the rear bumper.

1. Remove the two screws from the back-up

lamp assembly.

2. Pull the assembly from the rear bumper.

3. Remove the socket by turning it counterclockwise

and pull it out.

4. Pull the old bulb out. Do not twist it.

5. Push the new bulb into the socket.

6. Push the socket back into the assembly.

Tighten the socket by turning it clockwise.

7. Reinstall the assembly with the two screws.

Replacement Bulbs

Exterior Lamps

Bulb Number

Back-Up

921

Front Park/Turn Signal

3357NAK or
3457NAK

Front Sidemarker Lamps

194

Headlamps, High-Beam

9005

Headlamps, Low-Beam

9006

Rear Sidemarker Lamps

168

Taillamps/Stoplamps/Turn Signal

3057

For replacement bulbs not listed here, contact
you dealer.

5-57

Содержание MONTE CARLO 2005













































































































































































































































































































































































































Результаты поиска

Содержание MONTE CARLO 2005

Отзывы:

Chevrolet MONTE CARLO 2005, Руководство пользователя, Страница: 303 / 396

Результаты поиска

Содержание MONTE CARLO 2005

Отзывы: