Chevrolet Malibu 2021, Руководство пользователя

Страница: 139 / 350

Chevrolet Malibu Owner Manual (GMNA-Localizing-U.S./Canada-
14584249) - 2021 - CRC - 4/23/20
138 Infotainment System
the voice recognition dialog will progress in
the same way as if the selection were made
using a voice command. Once the system
completes the task, or the session is
terminated, the voice recognition dialog
stops.
An example of this type of manual
intervention is touching an entry of a
displayed number list instead of speaking
the number associated with the entry
desired.
Canceling Voice Recognition
. Touch or say “ Cancel ” or “ Exit ” to
terminate the voice recognition session
and show the display where voice
recognition was initiated.
.
Press
i
on the steering wheel controls
to terminate the voice recognition session
and show the display where voice
recognition was initiated.
Natural Language Commands
Most languages do not support natural
language commands in sentence form. For
those languages, use direct commands like
the examples shown on the display.
Helpful Hints for Speaking Commands
Voice recognition can understand commands
that are naturally stated in sentence form or
direct commands that state the application
and the task.
For best results:
. Listen for the prompt before saying a
command or reply.
. Speak the command naturally, not too
fast, not too slow.
.
Use direct commands without a lot of
extra words. For example,
“ Call <name>
at work, ” “ Play ” followed by the artist or
song name, or “ Tune ” followed by the
radio station number.
. Navigation destinations can be made in a
single command using keywords. A few
examples are:
“ I want directions to an
address, ” “ I need to find a place of
interest or (POI), ” or “ Find contact. ”
The system responds by requesting more
details. For other POIs, say the name of a
category like
“ Restaurants, ” “ Shopping
Malls, ” or “ Hospitals. ”
. Navigating to a destination outside of the
current country takes more than one
command. The first command is to tell
the system where the navigation will take
place, such as an Address, Intersection,
POI, or Contact. If Address or Intersection
is selected, the second command is to
say,
“ Change Country. ” Once the system
responds, say the country before saying
the rest of the address and/or
intersection.
If POI is asked for, say
“ Change Location, ”
then “ Change Country. ”
Direct commands might be more clearly
understood by the system. An example of a
direct command would be
“ Call <number>. ”
Examples of these direct commands are
displayed on most of the screens while a
voice session is active. If
“ Phone ” or “ Phone
Commands, ” is spoken, the system
understands that a phone call is requested
and will respond with questions until
enough details are gathered to make a call.
If a cell phone number has been saved with
a name and a place, the direct command
should include both, for example
“ Call
<name> at work. ”
Using Voice Recognition for List Options
When a list is displayed, a voice prompt will
ask to confirm or select an option from
that list.