Chevrolet Malibu Owner Manual (GMNA-Localizing-U.S./Canada-
14584249) - 2021 - CRC - 4/23/20
196
Driving and Operating
Setting Cruise Control
If
5
is on when not in use, -SET or +RES
could get bumped and go into cruise when
not desired. Keep
5
off when cruise is not
being used.
To set a speed:
1. Press
5
to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release -SET. The desired set
speed briefly appears in the instrument
cluster.
4. Remove your foot from the accelerator
pedal.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See
.
Resuming a Set Speed
If cruise control is set at a desired speed
and then the brakes are applied, cruise
control is disengaged without erasing the
set speed from memory.
Once the vehicle speed reaches about
40 km/h (25 mph) or more, briefly press
+RES. The vehicle returns to the previous set
speed.
Increasing Speed While Using Cruise Control
If the cruise control system is already
activated:
.
Press and hold +RES until the vehicle
accelerates to the desired speed, then
release it.
.
To increase the speed in small increments,
briefly press +RES. For each press, the
vehicle goes about 1 km/h (1 mph) faster.
The speedometer reading can be displayed
in either English or metric units. See
Information Center (DIC) (Base Level)
or
Driver Information Center (DIC) (Uplevel)
. The increment value used depends on
the units displayed.
Reducing Speed While Using Cruise Control
If the cruise control system is already
activated:
.
Press and hold -SET until the desired
lower speed is reached, then release it.
.
To slow down in small increments, briefly
press -SET. For each press, the vehicle
goes about 1 km/h (1 mph) slower.
The speedometer reading can be displayed
in either English or metric units. See
Information Center (DIC) (Base Level)
or
Driver Information Center (DIC) (Uplevel)
. The increment value used depends on
the units displayed.
Passing Another Vehicle While Using Cruise
Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previous set cruise speed. While pressing the
accelerator pedal or shortly following the
release to override cruise control, briefly
pressing -SET will result in cruise control set
to the current vehicle speed.
Using Cruise Control on Hills
How well the cruise control works on hills
depends upon the vehicle speed, load, and
the steepness of the hills. When going up
steep hills, you might have to step on the
accelerator pedal to maintain the vehicle
speed. When going downhill, you might
have to brake or shift to a lower gear to
keep your speed down. If the brake pedal is
applied, cruise control will disengage.
Ending Cruise Control
There are four ways to end cruise control:
.
Step lightly on the brake pedal.
.
Press
*
.
Содержание Malibu 2021
Страница 1: ...C M Y CM MY CY CMY K 21_CHEV_Malibu_COV_en_US_84523389A_2020MAY1 pdf 1 4 15 2020 1 32 23 PM ...
Страница 256: ...Chevrolet Malibu Owner Manual GMNA Localizing U S Canada 14584249 2021 CRC 4 23 20 Vehicle Care 255 ...
Страница 350: ...C M Y CM MY CY CMY K 21_CHEV_Malibu_COV_en_US_84523389A_2020MAY1 pdf 1 4 15 2020 1 32 23 PM ...