Chevrolet Malibu 2021, Руководство пользователя

Страница: 99 / 350

Chevrolet Malibu Owner Manual (GMNA-Localizing-U.S./Canada-
14584249) - 2021 - CRC - 4/23/20
98 Instruments and Controls
oil change. To reset the engine oil life
system, press and hold
V
for several
seconds while the Oil Life display is active.
See
Engine Oil Life System 0 236 .
Air Filter Life : Shows an estimate of the
engine air filter ’ s remaining useful life and
the state of the system. Engine Air Filter Life
95% means 95% of the current air filter life
remains. Messages will display based on the
engine air filter life and the state of the
system. When the REPLACE AT NEXT OIL
CHANGE message displays, the engine air
filter should be replaced at the time of the
next oil change. When the REPLACE NOW
message displays, the engine air filter
should be replaced as soon as possible.
The Air Filter Life display must be reset after
the engine air filter replacement. To reset,
see
Engine Air Filter Life System 0 237 .
Tire Pressure : Shows the approximate
pressures of all four tires. Tire pressure is
displayed in either kilopascal (kPa) or in
pounds per square inch (psi). If the pressure
is low, the value for that tire is shown in
amber. See
Tire Pressure Monitor System
0 267 and
Tire Pressure Monitor Operation 0 268 .
Average Vehicle Speed : Displays the
average vehicle speed of the vehicle in
kilometers per hour (km/h) or miles per
hour (mph). This average is based on the
various vehicle speeds recorded since the
last reset. Reset the average speed by
pressing
V
when it is displayed.
Fuel Economy : The center displays the
approximate instantaneous fuel economy as
a number and bar graph. Displayed above
the bar graph is a running average of fuel
economy for the most recently traveled
selected distance. Displayed below the bar
graph is the best average fuel economy that
has been achieved for the selected distance.
The selected distance is displayed at the top
of the page as
“ last xxx mi/km. ”
Press
p
to select the distance or reset best
value. Use
w
and
x
to choose the
distance and press
V
. Press
w
and
x
to
select “ Reset Best Score. ” Press
V
to reset
the best average fuel economy. After reset,
the best value displays
“ -,- ” until the
selected distance has been traveled.
The display provides information on how
current driving behavior affects the running
average and how well recent driving
compares to the best that has been
achieved for the selected distance.
Timer : This display can be used as a timer.
To start the timer, press
V
while this
display is active. The display will show the
amount of time that has passed since the
timer was last reset. To stop the timer,
press
V
briefly while this display is active
and the timer is running. To reset the timer
to zero, press and hold
V
while this display
is active, or press
p
and select reset.
Speed Limit : Shows the current speed limit
on vehicles with the navigation system. The
information for this page comes from a
roadway database.
Follow Distance : When Adaptive Cruise
Control (ACC) is not engaged, the current
follow time to the vehicle ahead is displayed
as a time value on this page. When ACC has
been engaged, the display switches to the
gap setting page. This page shows the
current gap setting along with the vehicle
ahead indicator.