Chevrolet Captiva 2007, Руководство пользователя

Страница: 212 / 321

Chevrolet Captiva Owner Manual (GMK-Localizing-Other IO/GMSA-
9507207) - 2016 - crc - 9/22/15
Driving and Operating 211
Rear Cross Traffic Alert (RCTA)
On vehicles with RCTA, a red
warning triangle with an arrow may
also display on the RVC screen to
warn of traffic coming from either
direction, behind the vehicle. When
an object is detected, three beeps
sound on the left or right side,
depending on the direction of the
detected vehicle. This system
detects objects coming from up to
20 m (65 ft) from the left or right side
behind the vehicle. Use caution
while backing up when towing a
trailer, as the RCTA detection zones
that extend out from the back of
your vehicle do not move further
back when a trailer is towed
Vehicle Personalization
0
119
.
Ultrasonic Parking Assist
Rear parking assists system
The parking assistance system aids
the driver during backward
movement of the vehicle by chiming
if any object is sensed behind the
vehicle.
This system is turned on whenever
the ignition switch is ON and the
transmission is shifted to
R (Reverse).
The chime sounds once when
shifting to R (Reverse). This
indicates a normal condition. If there
are several chimes when shifting to
reverse, there is a malfunction with
the system and the warning light
can come on. If this happens,
consult your dealer to repair the
problem as soon as possible.
You can figure out the distance
between your vehicle and obstacles
using the chime. The closer the
vehicle is to an object the faster the
chime will sound. If the distance is
less than 30 - 40 cm, the signal will
be continuous.
Front and rear parking assist
system
The parking assistance system
assists the driver during forward and
backward movement of the vehicle
by alarming if any object is sensed
between the vehicle and the
obstacle.
The system registers distance using
sensors in each of the front and rear
bumpers.
This system is automatically turned
on whenever the ignition switch
is ON.
Note
The front and rear sensors are
activated together when shifting the
gear to "R" position.
If the shifting lever is not in "R"
position, only front sensor is
activated.