Chevrolet 6500XD 2022 Скачать руководство пользователя страница 192

Страница: 192 / 312

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/2/21

Vehicle Care

191

2. Pull the upper lever (2) with your left

hand and turn down the handle (1) by
pulling it toward you with your right
hand to release the cab lock. The cab will
rise slightly at this time.

3. While grasping the grip (4) with your

left hand, pull the lower lever (3) with
your right hand and slowly raise the cab.

4. Fully lift up the cab and lock the tilt

support (1) while holding the part
indicated by the arrow. When it is
locked, it makes a

“

click

”

sound. Confirm

that the lock (2) of tilt support (1) is
securely engaged.

{

Warning

Do not touch the lock on the tilt support
while the cab is tilted. If you touch it, the
lock will release and the cab will lower.

5. Insert the attached lock pin in the hole

in the tilt support.

Содержание 6500XD 2022

























































































































































































































































































































Результаты поиска

Содержание 6500XD 2022

Отзывы:

Бренды по названию

Популярные бренды

Chevrolet 6500XD 2022, Руководство пользователя

Результаты поиска

Содержание 6500XD 2022

Отзывы:

Бренды по названию

Популярные бренды