Chesney's Alpine 4 Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 46

background image

22

The Clean Air Act 1993 and Smoke Control Areas

Under the Clean Air Act local authorities may declare the whole or part of the
district of the authority to be a smoke control area. It is an offence to emit
smoke from a chimney of a building, from a furnace or from any fixed boiler if
located in a designated smoke control area. It is also an offence to acquire an
"unauthorised fuel" for use within a smoke control area unless it is used in an
"exempt" appliance ("exempted" from the controls which generally apply in the
smoke control area).

The Secretary of State for Environment, Food and Rural Affairs has powers
under the Act to authorise smokeless fuels or exempt appliances for use in
smoke control areas in England. In Scotland and Wales this power rests with
Ministers in the devolved administrations for those countries. Separate
legislation, the Clean Air (Northern Ireland) Order 1981, applies in Northern
Ireland. Therefore it is a requirement that fuels burnt or obtained for use in
smoke control areas have been "authorised" in Regulations and that
appliances used to burn solid fuel in those areas (other than "authorised"
fuels) have been exempted by an Order made and signed by the Secretary of
State or Minister in the devolved administrations.
The Smoke Control Tab MUST BE REMOVED for use in a smoke control
area.

Chesney

’s range of Wood and Multi-Fuel stoves have been recommended as

suitable for use in smoke control areas when burning HETAS approved wood
logs and smokeless fuel only.

Further information on the requirements of the Clean Air Act can be found
here:

http://smokecontrol.defra.gov.uk/

Your local authority is responsible for implementing the Clean Air Act 1993
including designation and supervision of smoke control areas and you can
contact them for details of Clean Air Act requirements

«
...
20
21
22
23
24
...
»

Содержание Alpine 4 Series















































Отзывы:

Нет отзывов

Похожие инструкции для Alpine 4 Series

Бренд: Henley Stoves Страницы: 25

Бренд: Bartscher Страницы: 32

Бренд: ADURO Страницы: 14

CentroPelet ZS10

Бренд: Centrometal Страницы: 12

THAMES TRAVEL BARGE 6910115

Бренд: Clarke Страницы: 24

Бренд: Harman Stove Company Страницы: 38

Бренд: Harman Страницы: 24

Бренд: Harman Страницы: 42

Бренд: Cumberland Stove Works Страницы: 32

Бренд: Duroflame Страницы: 43

Бренд: Wood master Страницы: 32

Бренд: Sterling Страницы: 44

Бренд: ABC PROIZVOD Страницы: 11

Бренд: RAIS Страницы: 13

Бренд: Royal Страницы: 24

MULTIFIRE ARIA NT DX

Бренд: Palazzetti Страницы: 80

Бренд: Melchioni Страницы: 16

Бренд: Wamsler Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды