background image

 

 

Declaration of Conformity

We, Cherry Aerospace LLC, 1224 E. Warner Ave., Santa Ana, CA 92705 

declare under our sole responsibility that the product 

t y p e   G 6 8 9  

Serial No. ___________________ 

to which this declaration relates is in conformity with the following standards 

EN ISO 12100- parts 1 &2 

ISO 8662 part 1 

I S O   3 7 4 4  

following the provisions of the Machine Directive 2006/42/EC 

Santa Ana, CA - date of issue ____________  

Original certification and signature on  file 

 

14 

For more information please contact our Technical Services Department at Tel. 714-850-6022

 

Seller warrants the goods conform to applicable specifications and drawings and will be manufactured and inspected according to generally accepted practices of 
companies manufacturing industrial or aerospace fasteners.  In the event of any breach of the foregoing warranty, Buyer’s sole remedy shall be to return defective 
goods (after receiving authorization from Seller) for replacement or refund of the purchase price, at the Seller’s option.  Seller agrees to any freight costs in 
connection with the return of any defective goods, but any costs relating to removal of the defective or nonconforming goods or installation of replacement goods 
shall be Buyer’s responsibility.  SELLER’S WARRANTY DOES NOT APPLY WHEN ANY PHYSICAL OR CHEMICAL CHANGE IN THE FORM OF THE 
PRODUCT IS MADE BY BUYER.   

WARRANTY

THE FOREGOING EXPRESS WARRANTY AND REMEDY ARE EXCLUSIVE AND ARE IN LIEU OF ALL  OTHER WARRANTIES AND REMEDIES; 
ANY IMPLIED WARRANTY AS TO QUALITY, FITNESS FOR PURPOSE, OR MERCHANTABILITY IS HEREBY SPECIFICALLY DISCLAIMED AND 
EXCLUDED BY SELLER. 

 

THIS WARRANTY IS VOID IF SELLER IS NOT NOTIFIED IN WRITING OF ANY REJECTION OF THE GOODS WITHIN 

ONE (1) YEAR AFTER INITIAL USE BY BUYER OF ANY POWER RIVETER OR NINETY (90) DAYS AFTER INITIAL USE OF ANY OTHER 
PRODUCT. 
 
Seller shall not be liable under any circumstances for incidental, special or consequential damages arising in whole or in part from any breach by Seller, AND 
SUCH INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE HEREBY EXPRESSLY EXCLUDED. 

LOCTITE

® 

is a registered trademark of Henkel Corporation 

DEXRON

®

 is a registered trademark of GM corporation. 

1224 East Warner Ave, 

Santa Ana, Ca 92705 

Tel: 1-714-545-5511 

Fax: 1-714-850-6093 

www.cherryaerospace.com   

TM-G689 

Rev.: C 

DCR# 08-0440 
Date: 03/27/08

Supplier’s Federal Identification Code: 11815   

© 2007 CHERRY® AEROSPACE

 

PARKER

®

 is a trademark of Parker Hannifin Corporation 

LUBRRIPLATE

®

 is a trademark of Fiske Brothers Refining Co. 

Содержание G-689

















Отзывы: