Cherry Aerospace CHERRYMAX G749A, Руководство пользователя

Страница: 2 / 8

2
G749A CHERRYMAX
®
HAND RIVETER
NSN 5120-01-148-5847
DESCRIPTION
The Cherry G 749A is a heavy-duty, hand operated
hydraulic riveter designed specifically for the most
e f f i c i e n t i n s t a l l a t i o n o f C h e r r y M A X ® . I t w e i g h s
2 3/4 pounds, is 15" long without a pulling head and has a
0.518" stroke.
P u l l i n g h e a d s a r e n o t f u rn i s h e d w i t h t h i s ri v e t e r and
must be be ordered separately.
H749A-456 (straight), H753A-
456 (right angle) and H781-456 (offset) pulling heads fit directly
on the G 749A Riveter. Pulling head extensions are also
available
to reach into limited access areas; see
CherryMAX® catalog for part numbers.
The G 749A riveter with above listed pulling heads will in-
stall Bulbed CherryMAX® rivets in 1/8", 5/32" and 3/16"
nominal and oversized diameters, in all materials, head styles
and grip lengths.
The G 749A riveter with the H749A-456 or H753A-456 pulling
heads will install
1
/
8
",
5
/
32
" and
3
A
6
" Wiredraw CherryMAX® 'A'
rivets in all head styles and materials up to a -4 grip length. With
the H781-456 pulling head it will install 1/8" and 5/32"
Wiredraw CherryMAX® 'A' rivets in all head styes and
materials up to a -4 grip lengths.
To install serrated stem MS-type rivets, use adapter 704A9
and a screw-on type serrated stem pulling head of the correct
size.
PARTS LIST FOR G749A RIVETER
REF.
NO.
PART
NUMBER
DESCRIPTION
QTY
REC
1 P307 Retaining Ring 1
2 P882 0-Ring 2
3 749C11
Eng
Plug Assembly 1
*3A 704B2-2 Nose Fitting 1
*3B 749C11-1 End Plug 1
4 P877 0-Ring 3
5 P921 0-Ring 1
6 749C63 Drawbolt Piston 1
7 P878 Back-up Ring 1
8 755A9 Spring 1
9 745A7 Pump Bushing 1
10 P721 0-Ring 1
11 P572
Stat
-O-Seal 3
12 745Al2 Screw Lock 1
13 P383 0-Ring 1
14 745A5 Bladder 1
15 P701 0-Ring 1
16 745842 Vent Plug 1
17 745C51 Valve Sleeve Assembly 1
18 P573 Button
Hd.
Cap Screw 2
19 745C3A Housing Subassembly 1
20 745A28 Spring Retainer 1
21 745M6 Spring 1
22 P977 Poppet Valve 1
23 P111 0-Ring 1
24 P1007 0-Ring 2
25 745815 Pump Piston 1
26 745A21 Link Pin 2
27 P954 Link Plate 1
28 P1138 Roll Pin 1
29 745C19 Pivot Handle 1
30 P1011
Handle Grip
2
*Use Loctite No. 271, or equivalent, when assembling items 3A and 3B, when ordered
separately.
**By-pass valve assembly (item 17) is pressure tested and set at factory. Must be ordered
as an assembly only.