Chemtrac Auto Clean UV254, Руководство пользователя, Страница: 13 / 41

Chemtrac UV254 Monitor
– UVM5000 v 2.1
Chemtrac, Inc. 12
There are two push-in fittings on the side of the cabinet labeled IN and
OUT as shown in Figure 5.13.
1. Connect ¼
” OD flex tubing from the process to the IN-push
connector on the monitor.
2. Connect another piece of
¼” tubing to the OUT port on the monitor
and divert the line to the drain.
IMPORTANT: The test water must be allowed to flow unrestricted to the
drain so that no significant water pressure occurs inside the analyzer.
The maximum pressure rating for the monitor is 20 PSI.
Figure 5.13: Plumbing ports