ChemInstruments HLCL-1000, Руководство по эксплуатации

Страница: 9 / 19

CLEANING
The coating head can be disassembled for cleaning. *BE SURE THE MACHINE IS TURNED
OFF AND THE COATER IS AT ROOM TEMPERATURE*
1. Remove the plate on the right side of the machine that holds the heating elements in
place.
2. Remove the heating elements from the top and bottom coating bars and the
reservoir.
*HEATING ELEMENTS MAY BE HOT EVEN IF COATING BARS ARE
ROOM TEMPERATURE*
3. Loosen the thumbscrews and remove the top and bottom coating bars and the reservoir.
4. The top and bottom coating bars can be cleaned with a soft cloth and solvent. Be sure to
only use a soft cloth that will not cause scratches to the coating bars.
SETTING TEMPERATURE
Follow the instructions below to set the temperature for the top coating bar, bottom coating bar,
and reservoir. The temperature of the top coating bar, bottom coating bar, and reservoir are all
controlled independently.
*BE SURE THE MACHINE IS PLUGGED INTO AN
APPROPRIATE POWER SOURCE*
1. Turn the machine on.
2. Push the SET button.
3. The temperature setting under SV will
start blinking.
4. Use the
˂
arrow to select which number
you would like to change.
5. Use the
˄
or
˅
buttons to select the
correct number for the temperature you
would like to set.
6. Once you have selected the correct
temperature, press the
SET button to set
the coater to the programmed
temperature.
9