Electric Induction hobs Chef’sEH-DIH888/ EH-DIH888P
27
0x12
Er12
Also for radiant heating hobs: Shift registererror
0x13
Er13
Eepromerror
0x20
Er20
Flasherror
0x03
Continous Pushing of keys, this error is in your
specification described with anothervisualisation
0x04
E4
Basic Induction Communication Error Touch
Control doesn|t receive ID’s of the IHE
Tempearture on TC board over 105 degrees
(displays 5sec)
0x36
Er36
NTC out of valid value, maybe NTC isdestroyed.
0x39
Er39
Wrong programming options (fuses, lockbits)
There are a lot of other errorcodes, but only the suitable errorcodes for each
application have to beused.
Cooking zone specificerrors
These errorcodes are transmitted from Basic Induction to Touch Control for every
Cookingzone. The TouchControl has to check the errorcode-field and react to the
received errorcode in switching off the CookingZone and showing theerrorcode.
Cooking zone specific errors displays 5secs.
LIN-Bus
Display
Meaning
0x00
noerror
0x13
E5
EEPROMerror
0x20
E5
FLASHerror
0x21
E2
coil overheating error / HeatsinkOverheating
0x27
E6
heat sink temperature sensorerror
0x30
E5
EEPROM plausibilityerror
0x33
E6
power supply voltage zero-crossing-signal
missingerror