18
7.3.2 - Removing the blade pack (Fig. 7.2.2)
To remove the blade pack, proceed as follows:
-
Wear Kevlar safety gloves that meet accident-
prevention criteria.
-
Loosen the two knobs (2) fastening the scraper
and remove them.
-
Grip the scraper (3) (from in front of the
machine) and pull it towards yourself until it
slides off.
-
Loosen the two knobs on the slide (4).
-
Grip the blade pack (5) with both hands from the
sides.
-
Turn it with the blade tips towards yourself by
levering it on the fixing point, detach it and pull it
out.
7.3.3 - Removing the chopping board
(Fig. 7.2.3)
From the front of the machine grip the handle of
the chopping board (7) and pull it towards yourself
by sliding the board along the slit on the base.
Move it slightly to make the pin come out of the
hole and extract the chopping board.
3
Fig. 7.2.2
4
2
5
Fig. 7.2.3
6
7
3
English
CONTENTS
1. Delivery
and
warranty
4
1.1 Introduction
1.2
Storing and using this manual
1.3
Warranty
1.4 Machine
description
1.5
Intended use
1.6
Improper use
1.7
Specific equipment details
1.7.1 Warning and danger signs
1.8
Guards and safety devices
1.9 Work
position
2. Technical specifications
9
2.1
Main parts
2.2
Technical characteristics
2.3
Machine dimensions and weight
2.4
Noise level emitted
2.4
Wiring diagrams
2.4.1 Single-phase
wiring
diagram
2.4.2 Three-phase
wiring
diagram
3. Controls and indicators
13
3.1
List of controls and indicators
4. Factory testing, shipping, delivery and installation
13
4.1
Factory testing
4.2
Delivery and handling
4.3
Installation
4.3.1 Installation
4.3.2 Disposal of packaging
4.3.3 Handling the machine
4.4 Electrical
connections
4.4.1 Three-phase
machine
4.4.2 Single-phase
machine
5. Start-up and shutdown
15
5.1
Verification of the correct electrical connection
5.2
Verification of the presence and efficiency of guards and safety devices
5.3
Verification of the efficiency of the emergency stop button
5.4
Machine start-up
5.5 Machine
shutdown
6. Using the machine
16
6.1
Safety instructions
6.2
Using the machine
7. Maintenance
17
7.1 Safety
instructions
7.2
Lubrication
7.3
Cleaning the machine
7.3.1 Removing the plexiglass cover (Fig. 7.2.1)
7.3.2 Removing the blade pack (Fig. 7.2.2)
7.3.3 Removing the chopping board (Fig. 7.2.3)
7.4
WEEE (Waste Electrical and Electronic Equipment)
8. Malfunctions and remedies
20
8.1 Malfunctions: causes and remedies
