3
Operation
•
Remove all packaging including all protective plastic, from your
Chefmaster Stick Blender.
•
Attached the shaft to the motor unit by twisting it until its locked into
place.
•
Connect to the power supply.
•
Push the Switch knob and your stick blender will start working. Push
stronger for higher power.
•
Always use your Chefmaster Stick Blender in the vertical position.
•
Do not use your stick blender for more than 30 seconds at a time.
NOTE: If a piece of food becomes lodged in the protective guard
surrounding the metal blade, follow the safety instructions noted below:
1. Release the power button and unplug the unit from the electrical outlet.
2. Once the power source has been disconnected, use a spatula to carefully
remove the food lodged in the blade guard. The blade is sharp. Do not use
your fingers to remove lodged objects.
3. After the lodged food has been removed, plug the unit back into its power
supply and continue processing.
Cleaning & Maintenance
•
Before cleaning disconnect the stick blender from the electricity supply
•
Be very careful when touching the blade – It is extremely sharp.
•
Clean the product with warm soapy water, the shaft can be removed
and put through the dishwasher.
•
DO NOT submerge the stick blender housing in water or use water
sprays to clean it.
•
Always clean your Chefmaster Stick Blender daily.
Troubleshooting
Fault
Possible Cause
Solution
The unit is plugged in but
not working
The unit is not switched
on
The plug or lead are
damaged
The fuse has blown
Check the unit is plugged in
and switched on
Contact your Chefmaster
distributor
Replace the fuse