Chef CKE5065W, Инструкция

Страница: 25 / 36

25
Maintenance and Cleaning
The oven should be kept
clean at all times. A build-up of
fats or other foodstuffs could
result in a fire.
Before cleaning, ensure all
control knobs are in the OFF
position, and the appliance has
cooled completely.
Before any maintenance or
cleaning can be carried out, you
must DISCONNECT the cooker
from the electricity supply.
=
Cleaning materials
Before using any cleaning materials
on your oven, check that they are
suitable and that the manufacturer
recommends their use. Do not use
harsh abrasive cleaners or sharp
metal scrapers to clean the oven
door glass, as they can scratch the
surface which may result in
shattering the glass.
Cleaners that contain bleach
should NOT be used as they may
dull the surface finishes. A steam
cleaner is not to be used. Harsh
abrasives should also be avoided.
External cleaning
Regularly wipe over the control
panel, oven door and door seal using
a soft cloth well wrung out in warm
water to which a little washing up
liquid has been added.
To prevent damaging or
weakening the door glass panels
avoid the use of the following:
•
Household bleaches
•
Impregnated pads unsuitable
for non-stick saucepans
•
Brillo/Ajax pads or steel wool pads
•
Chemical oven pads or aerosols
•
Rust removers
•
Bath/Sink stain removers
Clean the outer and inner door glass
using warm soapy water. Should
the inner door glass become heavily
soiled it is recommended that a
cleaning product such as Hob Brite,
or Bar keepers Friend is used.
DO NOT clean the oven
door while the glass panels are
warm. If this precaution is not
observed the glass panel may
shatter.
If the door glass panel becomes
chipped or has deep scratches, the
glass will be weakened and must
be replaced to prevent the
possibility of the panel shattering.
Contact your local Electrolux
Service Centre who will be pleased
to advise further.
Oven Cavity
Wipe the oven over with a soft cloth
soaked in warm soapy water after
each use. From time to time it will
be necessary to do a more
thorough cleaning, using a
proprietary oven cleaner.