Cheetah 864XR Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 59

background image

C

HEETAH

864XR

V

IDEO

M

ATRIX

S

WITCHER

Publication 81-9059-0595-0, Rev. C

October 2010

Proprietary Information of

PESA

4-5

c)

Under the Cheetah directory, click on

Outputs

. Verify there are no errors and the

output module (card) configuration is correct as per your specification.

d)

Under the Cheetah directory, click on

Matrices

. Verify there are no errors and

the matrix module (card) configuration is correct as per your specification.

e)

Under the Cheetah directory, click on

Power Supplies

. Verify there are no

errors and the power supply module configuration is correct as per your
specification.

f)

Under the Cheetah directory, click on

Output Monitor

. Verify the output monitor

module (card) configuration is correct as per your specification. For each module,
verify the

Power Status

conditions are green and no other errors are present.

g)

Under the Cheetah directory, click on

Communications Summary

. (This

display  window  is  used  as  an  overview  of  all  system  components.)    Verify  the
status  for  each  component  (4)  is  indicating  green  and  there  are  no  errors  being
displayed.

7)

Frame Control Verification is complete. Exit the ViewPort program and disconnect the
serial cable from the PC and MFC. If your system includes the 3500 Series controller
module(s), proceed to System Control, Section 10.4.

4.4

S

YSTEM

C

ONTROL

This subsection only applies to Cheetah Series systems that are equipped with
3500 Series card(s)/module(s).

4.4.1

S

YSTEM

C

ONTROL

O

VERVIEW

The  3500  Series  System  Controller  is  full-featured,  microprocessor-based  unit  that  is
designed to interface with various configurations of PESA video and audio routing switchers.
The  3500  Series  System  Controller,  working  in  conjunction  with  the  3500  Series  Control
System software, provides a Graphic User Interface (GUI) that enables users to configure and
operate a routing switcher system from a standard IBM-compatible Personal Computer (PC).
Both  the  3500  Series  System  Controller  and  the  3500  Series  Control  System  software  are
inherently flexible and easily configured.  The 3500 Series LE has a smaller feature set and is
designed for smaller systems.

This subsection addresses the initial user communication setup, the onboard firmware
configuration, and initial settings for the specific Cheetah Series chassis system(s) that will be
placed in service. Additional reference materials for this section are included in the following
documents:

•

81-9059-0549-0 (Manual, 3500 Series System Controller and System Software)

•

81-9059-0432-0 A (03-99 3500Plus Dipswitch Setting Information Technical Bulletin)

•

81-9059-0551-0 (Technical Bulletin. 3500 Series Field Upgrade)

•

81-9059-0554-0 (Installation Guide, 3500Pro/3500 Series LE Software)

«
...
46
47
48
49
50
...
»

Содержание 864XR




























































Отзывы:

Нет отзывов

Похожие инструкции для 864XR

SmartCell 6A000

Бренд: Cabletron Systems Страницы: 114

Бренд: Cabletron Systems Страницы: 62

CyberSWITCH CSX150

Бренд: Cabletron Systems Страницы: 49

Cabletron CyberSWITCH CSX5500

Бренд: Cabletron Systems Страницы: 729

SMALL OFFICE CyberSwitch 150

Бренд: Cabletron Systems Страницы: 106

Бренд: ORiNG Страницы: 2

Бренд: QSFPTEK Страницы: 12

Бренд: Cabletron Systems Страницы: 54

Бренд: TESmart Страницы: 4

Бренд: SMC Networks Страницы: 6

Бренд: TCi Страницы: 11

Бренд: ATEN Страницы: 21

Бренд: Gefen Страницы: 9

Бренд: Brightlink Страницы: 17

CESRA PIR 10VDC

Бренд: DANLERS Страницы: 2

NSwitch Outdoors

Бренд: Moxa Technologies Страницы: 30

Бренд: KTI Страницы: 25

Бренд: Novy Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды