C
HEETAH
864XR
V
IDEO
M
ATRIX
S
WITCHER
Publication 81-9059-0595-0, Rev. C
October 2010
Proprietary Information of
PESA
4-4
Cheetah
Frame
Controller
Cheetah
Matrices
Input
Buffer
Output
Combiner
PC
Cheetah
ViewPort
Debug Port
RS-232 @
38,400 bps
Figure 4-1 - PC to Frame Controller Connection
If there are any errors noted while performing the following steps, perform
troubleshooting sequences to correct the problem(s) prior to proceeding to
the next step.
4)
Refer to the ViewPort Software Technical Manual as needed when performing the
following steps.
5)
Access the ViewPort software program from the computer and establish communication
with the Frame Controller card: the
RX
and
TX
LEDs on the circuit card will be flashing
green and yellow, respectfully.
6)
Using the ViewPort software GUI and referring to the packing list/specification sheet,
verify the following:
Occasionally, there may be recorded errors during the initial startup
sequence. However, they typically can easily be reset when the clear
function is initiated.
a)
Under the Cheetah directory, click on
Frame Controller Status
. Verify there are
no alarms and the MFC configuration (single or dual) is correct as per your
specification.
b)
Under the Cheetah directory, click on
Inputs
. Verify there are no errors and the
input module (card) configuration is correct as per your specification.
