DVR light and On/Off button
Appendix:
Adding Additional Storage for DVR Recording (continued)
How to Add Additional Storage
First, make sure you have checked the Received Signal Strength Indication (RSSI) (see
page 5). You can’t check RSSI after you begin using an external storage device.
1.
If the DVR light is blinking, press the DVR button. The light will turn off,
indicating DVR recording has stopped.
2.
Unplug the CheckVideo Gateway’s power.
3.
Connect the external storage device to the USB hub.
4.
Connect the hub to the Gateway USB port.
5.
Power up the USB hub.
6.
Connect the Franklin Module to the USB hub.
7.
Power up the Franklin Module.
8.
Power up the CheckVideo Gateway.
Figure 40
DVR light, DVR On/Off button, and USB port positions on CheckVideo Gateway
page 24
CheckVideo Gateway for Mobile Broadband Networks Installation Guide
USB port
Figure 41
USB hub connections
to Franklin
to external storage device
USB hub
to hub power
to Gateway
Note:
To avoid disruptions to your CheckVideo service after a power outage,
use the same UPS power source for all CheckVideo system components.
The UPS power source should be connected to a single power strip,
which feeds all CheckVideo components (i.e., the CheckVideo Gateway,
the Franklin Module, the external hub, and the external storage device).