Now you’re ready to configure your CheckVideo device. This process enables you
to define the events you want CheckVideo to look for. A wizard will guide you
through the next steps. Simply follow the orange buttons.
From the CheckView Dashboard, click Device > Configure Device.
On the Configure Device page, the Select Device section (Figure 25), should display
your device name.
Note:
If you wish to change the name of the device, enter the new
name in the Update Device field and click the Update Now link.
The page should automatically display the next section. If not, click the Select my
Camera button when you are ready to proceed to the next step (Figure 26).
Step 7
Configure the CheckVideo Device
page 14
CheckVideo Gateway for Mobile Broadband Networks Installation Guide
Figure 25
Configure Device page, Select Device section
Figure 26
Installation Wizard button that will direct you to the next step
